01-27-2020, 12:06 PM
ce que je lis dans la doc, c'est que c'est le 1° groupe qui doit être lié au stick, pas le 3°
Citation :10.1: Associations
Association (linking devices) - direct control of other devices within the Z-Wave system network e.g. Dimmer, Relay Switch, Roller Shutter or scene (may be controlled only through a Z-Wave controller).
Association ensures direct transfer of control commands between devices, is performed without participation of the main controller and requires associated device to be in the direct range.
The device provides the association of 3 groups:
1st association group – “Lifeline” reports the device status and al-
lows for assigning single device only (main controller by default).
2nd association group – “On/Off (IN1)” is assigned to IN1 input terminal (uses Basic command class).
3rd association group – “On/Off (IN2)” is assigned to IN2 input ter- minal (uses Basic command class).
The device in 2nd and 3rd group allows to control 5 regular or mul- tichannel devices per an association group, with the exception of “LifeLine” that is reserved solely for the controller and hence only 1 node can be assigned.